Tap 3 red lines to left for navigation menu

Just wanted to thank you and your crew for installing my rear end.So I’ve changed the rear end oil twice now and the car drives awesome! I bet lots of folks do not appreciate the work involved in setting up a rear-end and driveshaft on mixed matched old musclecars.This car drives so SMOOOOOOOOTH down here on these non potholed Florida roads!

Thank you again for the professional work done to my car.

Jamie...


Found this on my Yelp page from the owner of the 1967 Mercury Cougar
It has taken me over a year to write this review, and I don't know why but like a fine wine and good cars the work that Bonez did on my car has gotten better with time. Remember one thing when dealing with old cars, Good, Cheap and Fast. You only get to choose two of the three.
My car (1967 Mercury Cougar) had the same problems as the majority of older cars, the biggest of which was overheating. It got to the point where I used to drive around with the heater on in the summer time. Finally after tinkering with it for years, I caved in and decided that I didn't have the time that I used to to work on it and needed outside help.
I called a couple of other shops, but no one took me as seriously as Bonez. He wanted to see the car in person and came down to the house to visit it where it sat and talk about where the project would go and what I wanted.
If I could have given the car to him on that day to start working I would have as I was ready to go. Fast forward to Bonez scheduling a flatbed to come down to the house and the car was off to his shop.
I had dropped off a 5.0  at another machine shop that I will not mention here. They did nothing with the block after a year of sitting (I called multiple times). Bonez quickly called the machine shop and volunteered to pick up the block and drop it off to his machinist and the project was off and running.
From dropping off the block to a truck full of new suspension and brake parts along with all the other odds and ends that come with a project of this size Bonez was extremely direct and professional.
In the middle of the project Bonez actually got into an accident on his motorcycle (hit a deer) and was in the hospital and physical therapy for months. He was able to manage the business from his limited hours at the shop and the project kept up without a glitch. Truly a testament to his awesome passion for his job.
Bonez was able to talk me into removing all of the old undercoating which ended up turning out for the best because they found two small rust holes that were patched. He then welded on the subframe connectors and applied all new undercoating so there will be no issues for a long-long time. Throughout the project he not only listened to what I wanted but also was firm with his suggestions when he knew best.
When the project started to get the finishing touches not a single detail was overlooked, which I appreciate as I can be a little crazy when it comes to the minutia. It exceeded everything that I could have hoped. I now can get into the car, give it a few pumps of gas and off I go. The car never overheats, the oil pressure is right where it should be and the voltage is perfect (the wiring job was outstanding).
The work was so good, I have been contemplating getting another car, just so I can take it to the shop to see the work they can perform on another one. It is also fun getting to watch the progress from far away with the narrated videos that he goes out of his way to produce for each project.
If you are thinking that your project needs that extra helping hand don't hesitate to call and let Bonez and the garage take it to the place that it needs to be.
Rich...

Found this on my FaceBook page from Brett Gonzalez owner of the 48 GMC 3100 Pick-up.
I originally went to Bonez Garage based off reviews I had read. I brought my 1948 GMC pickup to them basically falling apart, barely running, and a safety hazard. I have never met a more honest and trustworthy shop in my life. The craftsmanship and attention to detail is out of this world with your personal safety being the number one priority. I can't thank Bill and crew enough for getting my truck up, running, and 100 times safer than when I first brought it to them. I will be a Bonez Garage customer for life.








Don C.
Just spoke with gentleman I saw with a late 50's early 60's
Dodge short bed that recommended you. I'll be in touch soon.. 1970 Chevy short bed step side straight 6 with a 3 on the tree .

Adrian Mandy
Bonez helped me achieve my goal of a big block street pounder in the form of a fully custom 1968 C10. He was extremely helpful and accommodating in what I wanted done and within my budget and I love his attention to detail. I highly recommend Bonez for your project.

Gazoo
Mr. Bonez identified and fixed the electrical problems on my 1998 Harley Davidson Dyna. This was the first time this OEM stock Harley was ever worked on since it was born off the factory line in California. All gaskets installed and no leaks. Now it runs better and I am confident there will be no failure from work performed. Thank you for your expertise. Highly recommended. Thanks
Gazoo aka Andy

BHW
What's up to all, the contents existing at this web site are genuinely awesome for people experience, well, keep up the good
work fellows.

Gazoo
Thank you for reaching out
and helping me with 98 Dyna today. I will continue to recommend your services. I wish you the best of luck with your new location. Best regards. Gazoo

Alan Piciocchi
No one touches the Iron Mustang but my man Bonez!

Carmine Camb
I have learn some good stuff here. Definitely bookmarking for revisiting. I wonder how so much effort you set to make this type of wonderful informative web site.

Share by: