Tap 3 red lines to left for navigation menu
1957 Chevrolet BelAir 4 door
We are going to be doing a power disc brake conversion, power steering conversion, a new 4 speed automatic transmission, custom bent dual exhaust system, electronic ignition, all new steering linkage, front and rear suspension bushings and ball joints, brakes and brake lines, fix and finish all of the trim and new weather stripping.

Click the play button on any of the videos below.
1957 Chevrolet BelAir 4 door is the next car coming into the shop. We are going to be doing a power disc brake conversion, power steering conversion, a new 4 speed automatic transmission, electronic ignition, all new steering linkage, front and rear suspension bushings and ball joints, brakes and brake lines, fix and finish all of the trim and new weather stripping.
1957 Chevrolet BelAir 4 door going over what we are going to be doing and giving you a quick look at her. We are going to be doing a power disc brake conversion, power steering conversion, a new 4 speed automatic transmission, electronic ignition, all new steering linkage, front and rear suspension bushings and ball joints, brakes and brake lines, fix and finish all of the trim and new weather stripping.
1957 Chevy BelAir 4 door getting some of the steering, suspension and brake stuff out of the car.
1947 Chevy BelAir is coming out great check out the video. Remember that you can also find us on YouTube under Bonez Garage.
1957 Chevy BelAir and what we found when we took the rear brakes drums off to remove the rear axles and center section. You can also find us on FaceBook @ FaceBook.com/BonezGarage and Instagram.
1957 Chevy BelAir is moving along nicely. We now have all of the dash back together and everything is working. We also fixed all of the wiring underneath the dash and behind the gauges as well as getting all of the dash lights working.
1957 Chevy Belair 4 door and we are starting to bend up the new dual exhaust system.
1957 Chevy Belair 4 door is coming along great. All of the new power disc brake braking system is now in, the new power steering and tilt steering column is in, the new 4-speed automatic transmission and driveshaft are in, most of the electrical and wiring are complete, all we have left basically is to bend up a new exhaust system, finish up the electrical and finish up all of the trim.
1957 Chevy BelAir and her first start-up. We still have to do all of the tuning on her and take her out for her first test drive but for a first start-up she is running great.
1957 Chevy BelAir 4 door we showed her running the other day now to show you the underside of the car and some what we have done to the underside of this little girl. Check out the video.
1957 Chevy Belair 4 door just giving a quick tour of what we did under the hood and in the interior.
1957 Chevy BelAir is not only running but she is now moving under her own power and going on her first test ride.
1957 Chevy BelAir is almost done we will now be doing all of the test driving and then checking, then test driving and checking and we will do this at least 4 or 5 times before we let her go home. We do this to make sure that all of the new pieces and and old parts play well together, everything is working and to see if there are any other problems that may need addressing. We really work hard to try and give you the best car we can and we stand behind all of our work.
1957 Chevy BelAir and I am taking you on her last test drive before she goes home. Making sure all is good and everything is working and at the end of the test drive we will put her back up on the lift to go over the whole car, again.
1957 Chevy BelAir 4 door is going home. Last video of her check it out.
Share by: